Elite Airtight Coating

The Elite Airtight Coating is designed to be used in areas where the walls will be left exposed as a finish coat or alternatively used as a parge coat. The coating is white (RAL 9016) in colour but can be over-coated using our Elite Matt water-based finish in any RAL or BS colour. Elite Airtight is designed to be applied by large volume airless spray machines. The Airtight test was carried out on the worst case scenario standard cellular blocks which leaked air in excess of 80m3/h.m2 prior to being coated with Elite Airtight. After coating with the Elite Airtight the air leakage was recorded at less than 0.36m3/h.m2

 

To achieve an airtight finish equivalent to the test you will use 1 litre of Elite Airtight coating to coat 1.5m2 of block wall. (3m2 per litre per coat)

Elite Airtight EN 121142000 T Airtight test report
Elite Airtight Coating - EN 121142000 T
Adobe Acrobat Document 39.2 KB
Elite Airtight Coating - Material Safety Data Sheet
Elite Airtight Coating - MSDS .pdf
Adobe Acrobat Document 251.8 KB
Elite Airtight Fire Test BS 476 Class 0
Adobe Acrobat Document 93.9 KB
Elite Airtight Fire Test BS 476 Pt 6 pdf
Adobe Acrobat Document 224.9 KB
Elite Airtight Fire test BS 476 Pt 7 pdf
Adobe Acrobat Document 166.2 KB
Elite Airtight Coating - Full Application Specification
Elite Airtight - Specification.pdf
Adobe Acrobat Document 298.4 KB
Airless Spray Machines suitable for application of Elite Airtight Coating
We have listed some examples of the typical airless spray machines used to apply the Elite Airtight Coating
Airless spray machines for Airtight Coat
Adobe Acrobat Document 166.9 KB

Airstop Pro-Parge

Airstop Pro-Parge - Airtight Test Report 2018
Airstop Pro-Parge Air Tightness Test Re
Adobe Acrobat Document 452.8 KB
Test Report 2011
Elite Airtight Coating - EN 121142000 T
Adobe Acrobat Document 39.6 KB
Brochure & Specification 2014
Elite Airtight - Brochure & Specificatio
Adobe Acrobat Document 298.4 KB

HRS Services - Appendix

 

APPENDIX TO 109848AT REPORT ON BLOCKWORK AIR PERMEABILITY FOR

PRISTINE ELITE AIRTIGHT COATING 21.03.11

 

Where we have stated the permeability is too low to detect we can qualify this comment with the

following statement:

 

Where the air permeability is less than 0.36m3/h/m2, no exact value can be obtained due to the resolution of the instrument. This represents very low levels of air leakage and an Air Permeability no greater than 0.36m3/h/m2.

 

The Professionals Choice:

  

BREEAM - Excellent rated Environment & Sustainability Institute - Cornwall (See article in Construction News)

 

Primary School - Kidderminster achieved air leakage rate of less than 2.5m3/sq.m./hr

 

Hamilton International Offices - Carbon Neutral building - Scotland

 

£30 million new build Shotts Prison - Lanarkshire, Scotland

 

For more details of our products, please send us an email:

info@pristinecoatings.co.uk

 

Supply & Apply - Best UK Prices

If you've got interior block walls that need fast, professional painting we can offer excellent prices for the supply and application of our coatings, using our own experienced operatives, or approved contractors. Please ask for a quote anywhere in the UK.

info@pristinecoatings.co.uk

In fact we believe that we can offer the best supply and apply prices in the UK for interior painting onto block walls - just ask for a quote.